The Batronix Professional Programmer Series offers an exceptionally flexible, simple to use and extremely fast set of eprom programmers supporting a broad range of chips. With a height of only 2.5 cm, the practical enclosure is noted for its design and anodized die-cast aluminum construction. These programming devices are your first choice even in a harsh usage environment.
The exceptional flexibility is attained by providing all power requirements via the USB port. A power adapter or batteries are not required, since all programming voltages are provided internally by a voltage generator from the USB supply voltage. The chips are programmed at a high level of quality and reproducibility in the shortest time possible through the use of optimized algorithms and micro-controller managed programming times. All supported chips can be programmed directly in DIP/DIL packages and suitable adapters are available for specialized packages such as PLCC, SOP, TSOP and QFP.
BX32P Barlino II - New version available now!
With the BX32P Barlino II a new version of the popular programming device BX32P Barlino is available now. The following improvements were implemented compared with the first version:
- Doubled firmware memory size: The BX32P Barlino II has enough place for future improvements and enlarged chip support.
- Improve pin driving possibilities: The BX32P Barlino II can drive more pins with supplying and programming voltages as its predecessor.
- Improved chip supply: The supply and programming voltages of the chips can now be set more accurately.
| Special Features | BX32 Batupo II | BX32P Barlino II | BX40 Bagero II | BX48 Batego II |
|---|---|---|---|---|
| USB Powered | ||||
| Chip Auto Identification | ||||
| Multi Programmer Control | ||||
| Automatic Programming Start | ||||
| Ultra Low Voltage Support | ||||
| Ultra High Speed Technology | ||||
| Multi Platform Support |
| Supported Devices | BX32 Batupo II | BX32P Barlino II | BX40 Bagero II | BX48 Batego II |
|---|---|---|---|---|
| very old NMOS EPROM (VPP > 15 V) | ||||
| NMOS EPROM (VPP <= 15 V) | ||||
| EPROM (27, 27C, 87, ...) | ||||
| EEPROM (28C, 28HC, ...) | ||||
| NV-RAM, Timekeeper (48, DS12, ...) | ||||
| FLASH (27E, 27SF, 28F, 28SF, 29C, 29F, ...) | ||||
| LPC, FWH, Firmware Hubs (39, 49, ...) | ||||
| Serial EEPROM (24, 25, 45, 93, 95, ...) | ||||
| 16 Bit EPROM, FLASH | ||||
| PLD, SPLD, EPLD, GAL | ||||
| Microcontroller, MCU, PIC | ||||
| NAND Flash | ||||
| In-System Programming (ISP) via Batronix Universal ISP Adapter | ||||
| Chip updates on customer request | Free via software updates | |||
Supported chip variants Last update (day.month.year) | 12,104 27.04.2018 | 25,735 27.04.2018 | 28,693 27.04.2018 | 44,863 27.04.2018 |
| Expected chip variants supported within the next 6-12 months | > 12,000 | > 25,000 | > 30,000 | > 50,000 |
| Complete chip support list |
| Chip Data Transfer Rate | BX32 Batupo II | BX32P Barlino II | BX40 Bagero II | BX48 Batego II |
|---|---|---|---|---|
| Parallel Flash Chip | up to 6.2 Mb/s | up to 6.2 Mb/s | up to 6.2 Mb/s | up to 51.2 Mb/s |
| Serial SPI Chip | | up to 0.6 Mb/s | up to 0.6 Mb/s | up to 10.7 Mb/s |
| Security- and Testfunctions | BX32 Batupo II | BX32P Barlino II | BX40 Bagero II | BX48 Batego II |
|---|---|---|---|---|
| Device selftest | ||||
| Pin contact test | ||||
| Chip ID test | ||||
| Voltage monitoring | ||||
| Current monitoring | ||||
| Data comparison under deviant voltages | ||||
| Checksum calculation (EPT-1, CRC-32, ...) |
Software
Batronix Prog-Express SoftwareThe operationg software, all updates and future versions are freeware and the current version can be downloaded from www.Batronix.com at any time and used without an activation key. This allows the Batronix programmers to remain current even after several years. Support for further chips is added quickly and free of charge based on customer requests, as long as these chips are supported by the hardware.
You can find the complete description at the Prog-Express page.
Video Presentation
We would like to show you how easy it is to use the Prog-Express software and the Batronix USB programming devices in a video presentation. Within 5 minutes, you will learn how to program a chip with the data from a file, copy an existing chip, read a chip and program 20 chips in volume production mode.
Chip Volume Production
For volume production of chips, up to eight BX32, BX32P, BX40 or BX48 devices can be controlled simultaneously from one PC using the Prog-Express software. These programming devices are an alternative to gang-programming devices due to their low cost and extremely high programming speeds, and also offer greater flexibility.
Read more information about cluster programming and gang programming.
Quality "Made in Germany" with a 5 year warranty period!
We believe in the quality and advantages our products offer and invite you to buy our products risk free for 30 days today! You can test the product for 30 days and if you aren't 100% satisfied, you can send the device back and we will refund the product price!
All Batronix BX programming devices are covered by a 5 year warranty.
