Units For Measuring EMF Radiation - With Interactive Converter (2025)

*This post may contain affiliate links. Please see my disclosure to learn more.

Figuring out the terminology when it comes to EMF radiation can be a little overwhelming at first (or even after a while!) To be honest, i’m still trying to get my head around it.I put together this guide to give myself, and hopefully you, a better understanding of the units used in measuring EMF radiation.

First, let’s talk about the basic measurements and why they’re important.

Understanding EMF Units

When you think of EMF radiation, there are two important things to keep in mind, and that is the frequency of the radiation, and the strength of that frequency.

Frequency of EMF RadiationUnits For Measuring EMF Radiation - With Interactive Converter (1)

The frequency of EMF radiation is usually measured in hertz. If you’ve read my articles on dirty electricity, you know that the electricity in your home, and at your office, is either 50 hertz (Hz) or 60 herts (depending on where you live).

The FM radio in your car operates off of mega hertz (a million hertz) so 91.3 FM means that it is operating on the frequency 91.3 MegaHertz (MHz) or 91,300,000 hertz.

Many of the devices that you are more familiar with, like your cell phone, your iPad, your computer, etc. that use WiFi or receive connection via cell towers do so in the GigaHertz (GHz) ranges. So if you’re phone is receiving 4G, that would be 4,000,000,000 hertz frequency.

Take a look at the chart to the right to get an idea of all of the different services that use these frequencies.

Strength of EMF Radiation

More often when we’re talking about the dangers of a particular source of EMF radiation, we’re talking about it’s strength. The strength of a radiation source is measured in several different units, including Watts, Gauss, Volts and many more. The unit being used will depend on many factors such as the type of radiation, the frequency, the region of the world, the medium etc.

Ok, now lets talk about what units of measurements you should most commonly expect to see with each of the 3 types of EMF radiation: Radio frequency, magnetic fields, and electrical fields.

Units of Measurement for Radio Frequency Radiation

When you’re thinking of radio frequency radiation, you need to remember that it has components of both magnetic and electric frequencies. So, you should usually express the strength of radio fields in separate terms specific to each of these components.

For the electric field portion of radio frequencies, you will most commonly see volts per meter (V/m), and for the magnetic portion you will most commonly see amperes per meter (A/m).

When we are measuring EMF radiation, it is usually measuring all of these components and their strength at a specific location.

For Radio frequency you will often also see the measurements:

  • microWatts per square meter(µW/m2)
  • microWatts per square centimeter (µW/cm2)
  • milliWatts per square meter (mWm²)

All of these are accepted means to measure radio frequency, which is why this can get a little bit muddled and difficult to understand

First let’s talk about the different conversions. Or if you want to jump down the the conversion calculator, just click HERE.

This does get a bit confusing, but just don’t forget that “mW” means “milliWatts” and “µW” means microWatts

So:1 W/m² = 1000 mW/m² = 1000,000 µW/m²

1W/cm² = 1000 mW/cm² = 1000,000 µW/cm²

1 μW/cm² = 10,000 μW/m²=10mW/m²

Measuring Power Density of Radio Fields

Often when we’re measuring radio field EMF radiation, we think of it in terms of power density. Power density is measured most accurately when the measurement is taken in what is called the “far field” of the radiation pattern. See the image below for some clarity on this. Why it is important to measure the power density of EMF radiation in the far field, is that in the near field, the way that the magnetic and electric components of the EMF radiation make it extremely difficult to measure accurately.

Units For Measuring EMF Radiation - With Interactive Converter (2)

This is why we measure power density in terms of power per unit area, such as Volts per meter (V/m), or milliwatts per square centimeter(mW/cm²)

Best Unit of Measurement For Radio Frequency Radiation

“Best” unit is a tough one to answer. I think for the purpose of this blog, which is focused on personal EMF radiation protection, the best way to measure would be in Volts per meter (V/m).

This is for a few reasons.

First of all, V/m is fairly easy to understand. More importantly though, V/m is one of the best ways to measure they pulsing effects of EMF radiation, which is often considered to be the most harmful form of EMF radiation.

Also, many of the best EMF meters, like the Cornet ED78S, give measurements in V/m.

Radio Frequency Conversions:

Most often when we’re converting RF, we’re converting between Watters per meter squared (W/m²), and our favorite, Volts per meter (V/m).

The formula for this is: V/m = (W/m2x 377)1/2

To convert back from V/m is:W/m² = (V/m)² / 377

Ok, blek, that was horribly boring, so let’s keep the train going, and talk about measuring magnetic fields, yahoo!

Magnetic Field EMF Unit of Measurement

Luckily, this is a bit simpler, because magnetic fields are also measured in units of Gauss, or Tesla.

In North America, you will most often see magnetic fields measured in Gauss, but in most of the rest of the world, Tesla is more common.

Knowing that even a weak magnetic field from a source of EMF radiation can cause damage to our bodies and health issues, you will often see both of these units of measurements in their smaller units, namely milliGauss, andmicroTesla (μT).

My two favorite EMF meters, theCornet ED78Sand the Trifield 100XEuse milliGauss (you’ll see it say mG on the meter)

Converting Magnetic Field Units of Measurement

Feel free to click Here to skip down to the conversion calculator.

Luckily though, converting between the most common measurements for magnetic fields is actually quite easy.

If we have 1mG, we also have0.1 μT

if we have1μT, we have10 mG

Electric Field EMF Units of Measurement

Measuring electric fields is the same as we measured them for their portion of radio field radiation above. The primary difference between the two is the scale of the measurement. For radio frequencies EMF radiation, like that coming to/from your cell phone, and from your WiFI router, we’re typically looking at the GigaHertz range, like 3g, 4g, etc. When we’re just looking at electric fields, like the wiring in your home, we’re usually looking at hertz. The wiring in your home is almost certainly 50 or 60 hertz.

Types of Meters for Measuring EMF radiation

An EMF meter, like the ones I recommended above and talk about in a few of my posts, is a way to measure the electromagnetic radiation over time. It does this with a special type of antenna.

Most meters are either single axis meters, or tri-axis meters.

When we’re measuring EMF radiation, like magnetic fields, we are measuring them in a specific space, over time. Therefore single axis meters only have one sensor in them, so to get a correct reading you would need to stand still, and slowly rotate the meter in a circle (kind of like you’re spinning a plate in your hand) until you found the highest reading, and that will be the most accurate.

Tri-axes meters measure all three axes simultaneously and give accurate readings regardless of where they are pointed, but tend to be more expensive (but worth it)

EMF Unit Conversion Calculator

Units For Measuring EMF Radiation - With Interactive Converter (3)

Christian

I created and currently manage EMF Academy, one of the premier sources for EMF safety knowledge. I am so passionate about spreading this crucial information. If you need anything, just shoot me an email at Christian@emfacademy.com and I'll do everything I can to help.

Units For Measuring EMF Radiation - With Interactive Converter (2025)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Jonah Leffler

Last Updated:

Views: 6392

Rating: 4.4 / 5 (45 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Jonah Leffler

Birthday: 1997-10-27

Address: 8987 Kieth Ports, Luettgenland, CT 54657-9808

Phone: +2611128251586

Job: Mining Supervisor

Hobby: Worldbuilding, Electronics, Amateur radio, Skiing, Cycling, Jogging, Taxidermy

Introduction: My name is Jonah Leffler, I am a determined, faithful, outstanding, inexpensive, cheerful, determined, smiling person who loves writing and wants to share my knowledge and understanding with you.